Call Us: 323.306.5067

My Cart:

0 item(s)


Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Small Block Ford

Small Block Ford

5 Item(s)

List  Grid 

  1. Ford Small Block 6.4" 50 oz. (in.) Lightweight SFI Harmonic Damper

    Part # 90046

    This is our lightweight damper, this version is for late Small Block Ford. These dampers have all the same features found in our 80007/90007 dampers but are about two pounds lighter. They have three sets of timing marks to essentially match up to all small block Ford timing pointers.

    Learn More
  2. Ford Small Block 6.4" 28 oz. in. Lightweight SFI Harmonic Damper

    Part # 90045

    This is out lightweight Versions of our regular Ford Small block dampers. These dampers are essentially the same as the 80006/90006 dampers but are about two pounds lighter. The lightweight dampers still use the same counterweights used in our regular dampers.

    Learn More
  3. Ford Small Block 6.4" Early (28.4 SFI Harmonic Damper

    Part # 90006

    These dampers are manufactured to match the dimensions of the stock early (1963-'69) small block Ford dampers. The outside diameter and the thickness are the same. The counterbalance weight matches the stock 28 ounce inches and the overall balance specifications are held tighter than the original O.E. tolerances. The dampers have both the early 3-bolt accessory pulley bolt pattern and the later 4-bolt as well. This will allow the use of late model serpentine drive systems on early engines if desired. The counterweight for this damper is removable, so if you want to build a neutral balance engine, you can use this damper by simply removing the bolt-in counterweight on the back of the damper

    Learn More

    Out of stock

  4. Timing Tape

    Part # 20600

    If your stock damper is missing timing marks or the ones on your existing damper are hard to read, one of these Timing Tapes is what you need. Peel and stick adhesive tapes come in a set of seven tapes suitable for the following damper diameters: 6”, 6.5”, 6.75”, 7”, 7.25”, 7.5” and 8”. If your damper is slightly off in diameter from one of the provided sizes, the marks will still generally be within one or two degrees. For example, SB Ford dampers are 6.4” in diameter. Use the 6.5” tape and at 34° of total timing you will be off by slightly more than a half degree. Clear white numbers and marks on a black background are easy to see with a timing light.
    Learn More
  5. Ford Small Block 6.4" '81 Late (50 oz. In.) SFI Harmonic Damper

    Part # 90007

    Our SB Ford Dampers have more universal features than any other damper. All SB Ford models are made to the early short length of 3". This allows the use of a late 5.0L engine with a 50 oz. in. damper to be used in an early chassis where front clearance is at a minimum. To fit in late vehicles, we offer a series of spacers to provide the correct front pulley alignment. These Ford dampers also have three sets of timing marks and both 3 and 4-bolt accessory pulley bolt patterns. The supplied plastic insert can be used to center 3-bolt pulleys with a female pilot, or it can be removed to accept 3-bolt pulleys with a male pilot. These dampers are very versatile and can be used on many different Ford engines.

    Learn More

    Out of stock

5 Item(s)

List  Grid 

My Cart

You have no items in your shopping cart.

Website Design, Black Ink Media